Panasonic PT-LZ370U Operating Instructions Manual

Also see for PT-LZ370U: Specification Brochure

Contents

Maintenance/replacement104 - ENGLISHMaintenance▶■ Replacing the lamp unitAttentionz Once a lamp unit has exceeded its lifespan of 3 000 hours (the lamp usage time (converted value)) theprojector can only be used for ten minutes after turning on the power. ( page 103)Perform Steps 14) to 17) within ten minutes.z When the projector is mounted on the ceiling, do not put your face near the lamp unit.z Do not open the top cover except when replacing the lamp unit.z Do not switch on the power while the top cover is opened.z Replace the air filter and electrostatic filter whenever replacing the lamp unit.z Securely attach the lamp unit and lamp unit cover.1) Follow the procedures described in “Switching off the projector” ( page 38), pressthe side of the

switch to turn off the power, disconnect thepower plug from the power outlet, and wait at least one hour, and then check if thelamp unit has cooled down.2) Remove the video cable connected to the connecting terminal.Attentionz If you open the top panel fully, it may come into contact with connectors such as the video cable which mayresult in breakage of the video cable. Before opening the top panel, be sure to remove the connected videocables, etc.3) Hold the protrusions at the front corner of the top cover of the projector and push upto open the top cover.▶z When the projector is mounted on the ceiling, stand at the lens side of the projector when opening/closingthe top cover.ProtrusionTop coverAttentionz Be careful not to open the top panel too far. For what to do if the top panel comes off, see “When to replace thelamp unit” ( page 103).