[PROJECTOR SETUP] menuENGLISH - 73 Settings[DATE AND TIME]You can set the time zone, date, and time of the built-in clock of the projector.By default, the time is set to +09:00.▶■ To set the time zone1) Press ▲▼ to select [DATE AND TIME].2) Press the button.▶z The [DATE AND TIME] screen is displayed.3) Press ▲▼ to select [TIME ZONE].4) Press ◀▶ to switch [TIME ZONE].▶■ To adjust the date and timeautomatically1) Press ▲▼ to select [DATE AND TIME].2) Press the button.▶z The [DATE AND TIME] screen is displayed.3) Press ▲▼ to select [ADJUST CLOCK].4) Press the button.▶z The [ADJUST CLOCK] screen is displayed.5) Press ▲▼ to select [NTPSYNCHRONIZATION], and press ◀▶to change the setting to [ON].▶z The setting will change as follows each timeyou press the button.[OFF] [ON][OFF] Does not synchronize NTP server.[ON] Synchronizes NTP server.6) Press ▲▼ to select [OK], and pressthe button.▶z The setting of the date and time will becompleted.▶■ To adjust the date and timemanually1) Press ▲▼ to select [DATE AND TIME].2) Press the button.▶z The [DATE AND TIME] screen is displayed.3) Select [ADJUST CLOCK].4) Press the button.▶z The [ADJUST CLOCK] screen is displayed.5) Press ▲▼ to select [NTPSYNCHRONIZATION], and press ◀▶to change the setting to [OFF].6) Press ▲▼ to select the item to be set,and press ◀▶ to set the local dateand time.7) Press ▲▼ to select [OK], and pressthe button.▶z The setting of the date and time will becompleted.Notez To set the date and time automatically, the projectormust be connected to the network.z If synchronization with the NTP server failsjust after [NTP SYNCHRONIZATION] is turned[ON], or if [NTP SYNCHRONIZATION] is turned[ON] while the NTP server is not set, [NTPSYNCHRONIZATION] will return to [OFF].z Access the projector via a web browser to setthe NTP server. Refer to “[Adjust clock] page”( page 87) for details.