[PICTURE] menu48 - ENGLISHSettingsSelect [PICTURE] from the main menu, andselect the item from the sub-menu.Refer to “Navigating through the menu”( page 44) for the operation of the menuscreen.z After selecting the item, press ▲▼◀▶ to set.[PICTURE MODE]You can switch to the desired picture mode suitablefor the image source and the environment in whichthe projector is used.1) Press ▲▼ to select [PICTURE MODE].2) Press ◀▶ or press the button.▶z The [PICTURE MODE] individual adjustmentscreen is displayed.3) Press ◀▶ to switch [PICTURE MODE].▶z The setting will change as follows each timeyou press the button.[STANDARD] [DYNAMIC] [BLACKBOARD][CINEMA] *1[NATURAL] *2 [DICOM SIM.] [WHITE BOARD]*1: When movie-based signals are input*2: When still image signals are input[STANDARD] The picture becomes suitable formoving images in general.[DYNAMIC] The light output is maximized foruse in bright areas.[BLACKBOARD] The picture becomes suitable forprojecting on a black board.[WHITEBOARD]The picture becomes suitable forprojecting on a white board.[DICOM SIM.]*1The picture becomes similar tothat of DICOM Part 14 GrayscaleStandard.[CINEMA] The picture becomes suitable formovie sources.[NATURAL] The picture complies with sRGB.*1: Set the items other than [PICTURE MODE] to the factorydefault.Notez The factory default picture modes are [DYNAMIC]for still image input signals and [STANDARD] formovie-based input signals.z DICOM, the abbreviation of “Digital Imaging andCommunication in Medicine”, is a standard formedical imaging technology. Although the nameDICOM is used in the setting item, this projectoris not for a medical use. Do not use the projectedimages for diagnostic purposes.[CONTRAST]You can adjust the contrast of the colors.1) Press ▲▼ to select [CONTRAST].2) Press ◀▶ or press the button.▶z The [CONTRAST] individual adjustment screenis displayed.3) Press ◀▶ to adjust the level.Operation Adjustment RangePress ▶ .Brightens thescreen and makesthe color of imagedeeper.Maximumvalue +64Press ◀ .Darkens the screenand makes thecolor of imagelighter.Minimumvalue - 64Attentionz Adjust [BRIGHTNESS] first when you need toadjust [BRIGHTNESS] and [CONTRAST].[PICTURE] menu