Panasonic PT-LZ370U Operating Instructions Manual

Also see for PT-LZ370U: Specification Brochure

Contents

ProjectingENGLISH - 39 Basic OperationCheck the connections of the external devices ( page 32), the connection of the power cord ( page 35), andturn on the power ( page 37) to start projection. Select the video for projection, and adjust appearance of theprojected image.Selecting the input signalSelect an input signal.1) Switch on the external devices.▶z Press the play button on an external device, such as a Blu-ray player. When the [DISPLAY OPTION] menu→ [SIGNAL SEARCH] ( page 64) is set to [ON], the projector automatically searches for an input signaland starts projection.2) Press the input selection (, ,

) buttons on the remote control or press the button onthe control panel.▶z Image for a signal input to the selected terminal is projected.Attentionz Images may not be projected properly depending on the external device or Blu-ray disc, DVD, etc. to be playedback. Set [TV-SYSTEM] ( page 55), [RGB/YC BC R ]/[RGB/YPBPR ] ( page 55) from [PICTURE].z Confirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio fromthe [POSITION] menu → [ASPECT] ( page 58).Adjusting the image1) Adjust the angle of the projector.▶z Place the projector parallel to the screen, and then install it on a flat surface so that the screen becomesrectangle.▶z If the screen is tilted lower than the screen, extend the adjustable feet to make a rectangle screen.▶z Refer to “Adjusting adjustable feet” ( page 28) for details.2) Remove the lens shift cover.▶z Refer to “Removing the lens shift cover” ( page 22) for details.Projecting