Technical information110 - ENGLISHAppendix▶■ PJLink security authenticationThe password used for PJLink is the same as that of the password set for the web browser control.When using PJLink without security authentication, do not set a password for the web browser control.▶z For specifications regarding PJLink, refer to the Japan Business Machine and Information SystemIndustries Association website.URL http://pjlink.jbmia.or.jp/english/Control commands via LAN▶■ When Web Control administrator rights password is set (Protect mode)▶zConnection method1) Obtain the IP address and port number (Initial set value = 1024) of the projector andrequest for a connection to the projector.You can obtain the IP address from the menu screen of the projector, and the port number from the WebControl page.IP address Obtain from the main menu → [NETWORK] → [STATUS]Port No. Obtain from Web Control [Detailed set up] → [Command port set up] page2) Check the response from the projector.Response dataData section Blank Mode Blank Random number section Terminationsymbol“NTCONTROL”(ASCII string)‘ ’0x20‘1’0x31‘ ’0x20“zzzzzzzz”(ASCII code hexadecimalnumber)(CR)0x0d9 bytes 1 byte 1 byte 1 byte 8 bytes 1 byteMode: 1 = Protect mode3) Generate a 32-byte hash value from the following data using MD5 algorithm.“xxxxxx:yyyyy:zzzzzzzz”xxxxxx Administrator rights user name for Web Control (default user name is “admin1”).yyyyy Password of above administrator rights user (default password is “panasonic”).zzzzzzzz 8-byte random number obtained in Step 2)