TroubleshootingENGLISH - 107MaintenanceTroubleshootingReview the following points. For details, see the corresponding pages.ProblemPoints to be checkedPagePower does not turnon.zIs the power plug firmly inserted into an outlet?―zIs the switch turned ?38zIs the wall outlet supplying electricity?―zHave the circuit breakers tripped?―zIs the lamp indicator or the temperature indicator illuminating or flashing?97, 98zIs the lamp unit securely installed?104No picture appears.zIs the connection to the picture (output) device correct?32zIs the input selection setting correct?42zIs the [BRIGHTNESS] adjustment setting at a minimum?49zIs the external device that is connected to the projector workingproperly?―zIs the AV mute function in use?41zIs the lens cover still attached to the lens?37The picture is fuzzy.zIs the lens focus set correctly?39zIs the projection distance appropriate?26zIs the lens dirty?17zIs the projector installed perpendicular to the screen?―The color is pale orgrayish.zIs [COLOR] adjusted correctly?49zIs [TINT] adjusted correctly?49zIs the device connected to the projector adjusted correctly?32Audio is not output.zIs the 23zIs the volume adjusted at a minimum?43zIs the AV mute function used?41zCheck [AUDIO IN SELECT] in [AUDIO SETTING].72The remote controldoes not operate.zAre the batteries depleted?―zIs the polarity of the batteries set correctly?24zAre there any obstructions between the remote control and theprojector’s remote control signal receiver?21zIs the remote control being used beyond its effective operation range?21zAre other forms of light, such as fluorescent lights, affecting theprojection?21zIs the [REMOTE CONTROLLER] setting in [CONTROL DEVICESETUP] set to [DISABLE]?77zIs the ID number setting operation correct?24