[SECURITY] menuENGLISH - 75 Settings[SECURITY] menuSelect [SECURITY] from the main menu, andselect the item from the sub-menu.Refer to “Navigating through the menu”( page 44) for the operation of the menuscreen.z When the projector is used for the first timeInitial password: Press ▲▶▼◀▲▶▼◀ inorder, and press the button.z After selecting the item, press ▲▼◀▶ to set.Attentionz Make the settings after displaying the [SECURITY]screen.z When the [SECURITY] screen is displayed,entering a password is required. Enter the setpassword and then continue operations.z When the password has been changed previously,enter the changed password, and press the button.Notez The entered password is displayed with * mark onthe screen.[PASSWORD]You can set to display the security password entryscreen when the projection starts. If the correctpassword is not entered, any operation other than thepower button operations becomes unavailable.1) Press ▲▼ to select [PASSWORD].2) Press ◀▶ to switch [PASSWORD].▶z The setting will change as follows each timeyou press the button.[OFF] [ON][OFF] Disables the security passwordentry.[ON] Enables the security passwordentry.Notez The [PASSWORD] is set to [OFF] by default andafter you perform initialization.z Change the password periodically that is hard toguess.z The security password will be enabled after setting[PASSWORD] to [ON] and turning off the power(standby mode).[PASSWORD CHANGE]You can change the security password.1) Press ▲▼ to select [PASSWORDCHANGE].2) Press the button.▶z The [PASSWORD CHANGE] screen isdisplayed.3) Press ▲▼◀▶ and number (<1> - <6>)buttons to set the password.▶z Up to eight button operations can be set.4) Press the button.5) Re-enter the password for theconfirmation.6) Press the button.Notez The entered password is displayed with * mark onthe screen.z An error message is displayed on the screen whenthe entered password is incorrect. Re-enter thecorrect password.z When numerals are used in the security password,initialization of the security password will benecessary if the remote control is lost. For themethod of initialization, consult your dealer.
