[SECURITY] menuENGLISH - 77 Settings[MENU LOCK PASSWORD]You can change the MENU LOCK PASSWORD.1) Press ▲▼ to select [MENU LOCKPASSWORD].2) Press the button.▶z The [MENU LOCK PASSWORD] screen isdisplayed.3) Press ▲▼◀▶ to select the text, andpress the button to enter thetext.▶z Up to 16 characters can be entered.4) Press ▲▼◀▶ to select [OK], andpress the button.▶z Select [CANCEL] to stop.Attentionz The initial password when used for the first time orafter initializing is “AAAA”.z Change the password periodically that is hard toguess.[CONTROL DEVICE SETUP]You can enable/disable the button operations on thecontrol panel and the remote control.1) Press ▲▼ to select [CONTROLDEVICE SETUP].2) Press the button.▶z The [CONTROL DEVICE SETUP] screen isdisplayed.3) Press ▲▼ to select an item, and press◀▶ to change the setting.▶z When the confirmation message is displayedafter setting [DISABLE], select [OK] and pressthe button.▶■ [CONTROL PANEL]▶z You can set the limitation on the control fromthe control panel.[ENABLE] Enables the button operation fromthe main unit.[DISABLE] Disables the button operation fromthe main unit.▶■ [REMOTE CONTROLLER]▶z You can set the limitation on the control fromthe remote control.[ENABLE] Enables the button operation fromthe remote control.[DISABLE] Disables the button operation fromthe remote control.Notez It will not be possible to turn off the power (standbystatus) if the operations of both of [CONTROLPANEL] and [REMOTE CONTROLLER] are set to[DISABLE].Canceling [DISABLE] setting:Press the button while holding downthe the main unit controls to reset the [DISABLE]setting on [CONTROL PANEL] to [ENABLE].Use the control panel of the projector to changethe setting of [REMOTE CONTROLLER].
