Menu navigation44 - ENGLISHSettingsMenu navigationNavigating through the menu▶■ Operating procedurebutton1) Press the remote control or the control panel.▶z The main menu screen is displayed.00000PICTUREPOSITIONLANGUAGEDISPLAY OPTIONPROJECTOR SETUPSECURITYNETWORKPICTURE MODECONTRASTBRIGHTNESSCOLORTINTSHARPNESSCOLOR TEMPERATUREDYNAMIC IRISWAVEFORM MONITORADVANCED MENUDAYLIGHT VIEWSTANDARDONAUTOAUTODIGITAL CINEMA REALITYNOISE REDUCTIONRGB/YCB C R2) Press ▲▼ to select the main menuitem.▶z The selected item is highlighted in yellow.▶z The sub-menu of the selected main menu itemis displayed on the right.000PICTUREPOSITIONLANGUAGEDISPLAY OPTIONPROJECTOR SETUPSECURITYNETWORKKEYSTONESHIFTOVER SCANASPECTFRAME LOCKNORMALH : V :OFF3) Press the button.▶z Sub-menu items become selectable.4) Press ▲▼ to select the sub-menuitem, then press ◀▶ to change thesettings or adjust the parametervalues.▶z For some items, press ◀▶ to display anindividual adjustment screen with a bar scale asshown in the following diagram.0KEYSTONE▶z For items that are only names, pressing the button displays the next screen andadvanced settings can be performed.Notez Pressing the or when the menu screen is displayed returns to theprevious screen.z Some items may not be adjusted or used for certainsignal formats being input to the projector.z Some items can be adjusted even if signals are notinput.z Individual adjustment screen is clearedautomatically if no operation is performed forapproximately five seconds.z Refer to “Main menu” ( page 46) or “Sub menu”( pages 46 to 47) regarding the menu items.The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.