Chapter 4 Settings — [DISPLAY OPTION] menu114 - ENGLISHWhen the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installedSetting [DVI-D LINK] in [SLOT IN] (DVI-D input)1) Press as to select [SLOT IN].2) Press the button.f The [SLOT IN] screen is displayed.3) Press as to select [DVI-D LINK], and press the button.f The [DVI-D LINK] screen is displayed.4) Press as to select the setting.[AUTO]Automatically selects the single link, the dual link, or the quad link.Selects the quad link when the signal in the same format (such as resolution and timing) is input inthe four inputs of DVI-D1, DVI-D2, DVI-D3, and DVI-D4. Selects the dual link when the signal in thesame format is input in the DVI-D1 input and the DVI-D2 input, or the DVI-D3 input and the DVI-D4.Quad link will be automatically selected when the optional Interface Board for DVI-D 2 input (ModelNo.: ET-MDNDV10) is installed in both of the slots.[SINGLE] Sets the DVI-D1 input and the DVI-D2 input, and the DVI-D3 input and the DVI-D4 input to single link.(Factory default setting)[DUAL]*1 Sets the DVI-D1 input and the DVI-D2 input, or the DVI-D3 input and the DVI-D4 input to dual link.[DUAL/SINGLE]*2 Sets the DVI-D1 input and the DVI-D2 input to dual link, and the DVI-D3 input and the DVI-D4 input tosingle link.[SINGLE/DUAL]*2 Sets the DVI-D1 input and the DVI-D2 input to single link, and the DVI-D3 input and the DVI-D4 inputto dual link.[DUAL/DUAL] *2 Sets the DVI-D1 input and the DVI-D2 input to dual link, and the DVI-D3 input and the DVI-D4 input todual link.[QUAD] *2 Sets the DVI-D1 input, the DVI-D2 input, the DVI-D3 input, and the DVI-D4 input to quad link.*1 This can be selected when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in either of the slots.*2 This can be selected when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in both of the slots.5) Press the button.Notef [DVI-D LINK] is fixed to [SINGLE] in the following cases.g When [SIMUL INPUT SETTING] is set to anything other than [OFF]g When the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] is set to anything other than [OFF] and displaying the four-screen displayf The [DVI-D LINK] setting cannot be changed when [BACKUP INPUT MODE] in [BACKUP INPUT SETTING] is set as the combination usedfor the DVI-D input of the Interface Board.f The content set is displayed in [DVI-D LINK SETTINGS].r Structure of the projected imageThe single link is a setting to display one image with one input signal. The dual link is a setting to display oneimage with two input signals. The quad link is a setting to display one image with four input signals.Dual linkDVI-D1/DVI-D3DVI-D1 DVI-D2DVI-D3 DVI-D4DVI-D2/DVI-D4Quad linkSingle linkSetting [SIGNAL LEVEL] in [SLOT IN] (DVI-D input)1) Press as to select [SLOT IN].2) Press the button.f The [SLOT IN] screen is displayed.
