Chapter 4 Settings — [ADVANCED MENU] menu96 - ENGLISH8) Press as to select [MARKER].9) Press qw to switch to [ON].f A marker for image position adjustment is displayed. The position where the red and green lines overlap forthe projectors to be joined will be the optimal point. Make sure to set the correction width for the projectorsto be joined with the same value. Optimal joining is not possible with projectors that have differentcorrection widths.The optimal point is the point at which these lines overlap.Green lineRed line10) Press as to select [BRIGHTNESS ADJUST].11) Press the button.f The [BRIGHTNESS ADJUST] screen is displayed.f By setting [AUTO TESTPATTERN] to [ON] on the [EDGE BLENDING] screen, the black test pattern isdisplayed when you enter the [BRIGHTNESS ADJUST] screen.12) Press as to select [NON-OVERLAPPED BLACK LEVEL].13) Press the button.f The [NON-OVERLAPPED BLACK LEVEL] screen is displayed.f [RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].14) Press as to select an item, and press qw to adjust the setting.f Once the adjustment is completed, press the [BRIGHTNESS ADJUST]screen.15) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH].16) Press qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment.17) Press as to select [UPPER KEYSTONE AREA], [LOWER KEYSTONE AREA], [LEFT KEYSTONEAREA], or [RIGHT KEYSTONE AREA].18) Press qw to adjust the tilt of the border between [NON-OVERLAPPED BLACK LEVEL] and [BLACKBORDER LEVEL].19) Press as to select [BLACK BORDER LEVEL].20) Press the button.f The [BLACK BORDER LEVEL] screen is displayed.f [RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].21) Press as to select an item, and press qw to adjust the setting.f Once the adjustment is completed, press the [BLACK BORDER LEVEL]screen.22) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] for [OVERLAPPED BLACK LEVEL].23) Press the button.f The [OVERLAPPED BLACK LEVEL] screen is displayed.f [RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].
