Chapter 2 Getting Started — Connecting48 - ENGLISHFor / terminals and / terminals of the InterfaceBoardThis is an example when the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) is installed in 1>.Blu-ray disc playerNotef For the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. If a cable that does not conform to the HDMIstandards is used, images may be interrupted or may not be projected.Even if an HDMI High Speed cable that conforms to the HDMI standards is used, the 4K image may not be projected properly depending onthe performance or the length of the cable.f Setting the [DISPLAY OPTION] menu → [SLOT IN] is required depending on the connected external device or the input signal.Set [HDMI LINK] in [SLOT IN] when the dual link signal or the quad link signal is input.f The /// terminals can be connected to the external device with a DVI-D terminal byusing the HDMI/DVI conversion cable. However, this may not function properly for some external devices, and image may not be displayed.f The projector does not support VIERA Link (HDMI).For / terminals and / terminals of theInterface BoardThis is an example when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in 2>.DVD player with HDMI terminal (HDCP)Notef Setting the [DISPLAY OPTION] menu → [SLOT IN] is required depending on the connected external device or the input signal.Setting [DVI-D LINK] in [SLOT IN] is required when the dual link signal or the quad link signal is input.f The /// terminals can be connected with the HDMI and DVI-D compatible device.However, some external devices may not be able to project images properly, such as the image not displaying.
