Chapter 4 Settings — [PROJECTOR SETUP] menuENGLISH - 145Loading the lens position1) Press as to select [LENS MEMORY].2) Press the button.3) Press as to select [LENS MEMORY LOAD].4) Press the button.f The [LENS MEMORY LOAD] screen is displayed.5) Press as to select the item to load, and press the button.6) When the confirmation screen is displayed, press qw to select [OK], and press the button.f The lens moves automatically to the registered shift, zoom, and focus positions.Notef Lens memory is not guaranteed to be 100 % reproduced.f The zoom and focus positions may have shifted after lens memory was loaded. Readjust as necessary.Beware of shift, as errors in zoom position are particularly significant.f When a lens is replaced, readjust and save the lens memory again.f If a lens without zoom function is used, the lens memory of the zoom position does not operate.f When [LENS MEMORY LOAD] is assigned to the button, the registered lens memory is loaded in order each time you pressthe button.Deleting a lens memory1) Press as to select [LENS MEMORY].2) Press the button.3) Press as to select [LENS MEMORY EDIT].4) Press the button.f The [LENS MEMORY EDIT] screen is displayed.5) Press as to select [LENS MEMORY DELETE].6) Press the button.f The [LENS MEMORY DELETE] screen is displayed.7) Press as to select the item to delete, and press the button.8) When the confirmation screen is displayed, press qw to select [OK], and press the button.Changing the lens memory name1) Press as to select [LENS MEMORY].2) Press the button.3) Press as to select [LENS MEMORY EDIT].4) Press the button.f The [LENS MEMORY EDIT] screen is displayed.5) Press as to select [LENS MEMORY NAME CHANGE].6) Press the button.f The [LENS MEMORY NAME CHANGE] screen is displayed.7) Press as to select the name to change, and press the button.f The [LENS MEMORY NAME INPUT] screen is displayed.8) Press asqw to select the text, and press the button to enter the text.
