Panasonic PT-RQ13K Operating Instructions Manual

Also see for PT-RQ13K: Operating instructions (functional manual)Manual Operating instructions Operating instructions

Contents

Chapter 1 Preparation — Preparing the remote control32 - ENGLISHPreparing the remote controlInserting and removing the batteries(i)(ii)Fig. 1 Fig. 21) Open the cover. (Fig. 1)2) Insert the batteries and close the cover (insert the m side first). (Fig. 2)f When removing the batteries, perform the steps in reverse order.When using the multiple projectorsWhen you use the multiple projectors together, you can operate all the projectors simultaneously or each projectorindividually using single remote control, if a unique ID number is assigned to each projector.When using the projectors by setting the ID numbers, set the ID number of the projector body after initial settingshave been completed. Then, set the ID number of the remote control. For initial settings, refer to “When the initialsetting screen is displayed” (x page 56).The factory default ID number of the projector (projector body and remote control) is set to [ALL], so you can useit as it is. Set the ID numbers of the projector body and remote control as necessary.For details on setting the ID number of the remote control, refer to “Setting ID number of the remote control”(x page 74).Notef Set the ID number of the projector body from the [PROJECTOR SETUP] menu → [PROJECTOR ID].