Chapter 3 Basic Operations — Projecting64 - ENGLISHProjectingCheck the projection lens attachment (x page 44), external device connection (x page 46), power cordconnection (x page 54), switch on the power (x page 55) to start projecting. Select the video for projection,and adjust appearance of the projected image.Selecting the input signalSelect an input signal.1) Press the input selection button on the remote control or the control panel.f The buttons that can be used on the remote control or the control panel are as follows.Remote control: button, button, button, 1> button, 2> button, buttonControl panel: button, button, button, 1> button, 2> buttonf The image of the signal being input in the selected terminal is projected.Attentionf Images may not be projected properly depending on the external device, or the Blu-ray disc or DVD disc, to be played back.Set the [PICTURE] menu → [SYSTEM SELECTOR]. When the SDI signal is input, set the [DISPLAY OPTION] menu → [SDI IN], or set the[DISPLAY OPTION] menu → [SLOT IN].f Confirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu →[ASPECT].Notef button, button, 1> button, and 2> button can be used when the optional Interface Board equipped withcorresponding input is installed in the slot.f For details of operation for input selection, refer to “Switching the input” (x page 69).How to adjust focus, zoom, and shiftIf the projected image or the position is not correct when the positioning of the projector and the screen is correctlyinstalled, adjust the focus, zoom, and shift.This section describes the adjustment method when anything other than the Fixed-focus Lens (Model No.:ET-D75LE90) is used. When the Fixed-focus Lens (Model No.: ET-D75LE90) is used, refer to “Adjusting the lensposition and focus when the Fixed-focus Lens (Model No.: ET-D75LE90) is used” (x page 65).Using the control panel1) Press the button on the control panel.f Pressing the button changes the adjustment screen in the order of [FOCUS], [ZOOM], and [SHIFT].2) Select each item and press asqw to adjust it.Using the remote control1) Press the lens buttons (, , ) on the remote control.f button: Adjusts focus.f button: Adjusts zoom.f button: Adjusts shift.2) Select each item and press asqw to adjust it.CAUTIONDuring the lens shift operation, do not insert your hand in any opening around the lens.Your hand may be caught in between, resulting to injury.
