Panasonic PT-RQ13K Operating Instructions Manual

Also see for PT-RQ13K: Operating instructions (functional manual)Manual Operating instructions Operating instructions

Contents

Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 117[SINGLE]Sets the SDI1 input and the SDI2 input, and the SDI3 input and the SDI4 input of the Interface Boardto single link.(Factory default setting)[DUAL]*1 Sets the SDI1 input and the SDI2 input, or the SDI3 input and the SDI4 input of the Interface Board todual link.[DUAL/SINGLE]*2 Sets the SDI1 input and the SDI2 input of the Interface Board to dual link, and the SDI3 input and theSDI4 input of the Interface Board to single link.[SINGLE/DUAL]*2 Sets the SDI1 input and the SDI2 input of the Interface Board to single link, and the SDI3 input andthe SDI4 input of the Interface Board to dual link.[DUAL/DUAL] *2 Sets the SDI1 input and the SDI2 input of the Interface Board to dual link, and the SDI3 input and theSDI4 input of the Interface Board to dual link.[QUAD] *2 Sets the SDI1 input, the SDI2 input, the SDI3 input, and the SDI4 input of the Interface Board to quadlink.*1 This can be selected when the optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) is installed in either of the slots.*2 This can be selected when the optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) is installed in both of the slots.5) Press the button.Notef The single link is a setting to display one image with one input signal. The dual link is a setting to display one image with two input signals.The quad link is a setting to display one image with four input signals.f [SDI LINK] is fixed to [SINGLE] in the following cases.g When [SIMUL INPUT SETTING] is set to anything other than [OFF]g When the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] is set to anything other than [OFF] and displaying the four-screen displayf The [SDI LINK] setting cannot be changed when [BACKUP INPUT MODE] in [BACKUP INPUT SETTING] is set as the combination used forthe SDI input of the Interface Board.f The content set is displayed in [SDI LINK SETTINGS].Setting [RESOLUTION] in [SLOT IN] (SDI input)1) Press as to select [SLOT IN].2) Press the button.f The [SLOT IN] screen is displayed.3) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], andpress the button.f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]screen is displayed.4) Press as to select [RESOLUTION], and press the button.f The [RESOLUTION] screen is displayed.5) Press as to select an item, and press the button.f Select [AUTO], [720x480i], [720x576i], [1280x720p], [1920x1080i], [1920x1080p], [1920x1080sF],[2048x1080p], or [2048x1080sF] when [SINGLE LINK SETTING] is selected.f Select [AUTO], [1920x1080i], [1920x1080p], [1920x1080sF], [2048x1080p], [2048x1080sF], [3840x2160p],or [4096x2160p] when [DUAL LINK SETTING] is selected.f Select [AUTO], [3840x2160p], [3840x2160sF], [4096x2160p], or [4096x2160sF] when [QUAD LINKSETTING] is selected.Setting [4K DIVISION] in [SLOT IN] (SDI input)Set the transmission method in the 4K format when displaying the 4K image with dual link or quad link.1) Press as to select [SLOT IN].2) Press the button.f The [SLOT IN] screen is displayed.3) Press as to select [DUAL LINK SETTING] or [QUAD LINK SETTING], and press the button.f The [DUAL LINK SETTING] screen or the [QUAD LINK SETTING] screen is displayed.4) Press as to select [4K DIVISION].