Chapter 4 Settings — [PICTURE] menuENGLISH - 81[PICTURE] menuOn the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 76) for the operation of the menu screen.[PICTURE MODE]You can switch to the desired picture mode suitable for the image source and the environment in which theprojector is used.1) Press as to select [PICTURE MODE].2) Press qw.f The [PICTURE MODE] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[STANDARD] The image becomes suitable for moving images in general.[CINEMA] The image becomes suitable for movie contents.[NATURAL] The image is sRGB compliant.[DICOM SIM.] The image becomes similar to that of DICOM Part 14 Grayscale Standard.[DYNAMIC] The light output is maximized for use in bright areas.[GRAPHIC] The image becomes suitable for input from the personal computer.[USER] Set any desired picture mode.Notef The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie-based input signals.f DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although theDICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.f Press the button when each [PICTURE MODE] is selected to save as a specified value when a new signal is input. The data ofall items except [SYSTEM SELECTOR] in the [PICTURE] menu is saved.f In the factory default settings, [USER] is set to images that comply with the ITU-R BT.709 standard.Changing the [USER] name1) Press as to select [PICTURE MODE].2) Press qw to select [USER].3) Press the button.f The [PICTURE MODE] detailed screen is displayed.4) Press as to select [PICTURE MODE NAME CHANGE], and press the button.f The [PICTURE MODE NAME CHANGE] screen is displayed.5) Press asqw to select the text, and press the button to enter the text.6) Press asqw to select [OK], and press the button.f The picture mode name is changed.[CONTRAST]You can adjust the contrast of the colors.1) Press as to select [CONTRAST].2) Press qw or the button.f The [CONTRAST] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress w. The screen becomes brighter. -31 - +31Press q. The screen becomes darker.
