Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 1153) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], andpress the button.f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]screen is displayed.4) Press as to select [SIGNAL LEVEL].5) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[0-255:PC]Select this item when the DVI-D terminal output of the external device (such as computer) is input tothe terminal, the terminal, the terminal, or the 4> terminal.[16-235]Select this item when the HDMI terminal output from the external device (such as Blu-ray disc player)is input to the terminal, the terminal, the terminal, or the terminal via a conversion cable, etc.Notef The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of theexternal device regarding the output of the external device.Setting [EDID SELECT] in [SLOT IN] (DVI-D input)1) Press as to select [SLOT IN].2) Press the button.f The [SLOT IN] screen is displayed.3) Press as to select [EDID SETTING], and press the button.f The [EDID SETTING] screen is displayed.4) Press as to select [EDID SELECT].5) Press qw to switch the item.f The items will switch each time you press the button.[EDID3] Recognizes moving image signals and still image signals automatically.[EDID1]Select this item mainly when the external device (such as Blu-ray disc player) which outputs themoving image signal is connected to the terminal, the terminal, the terminal, or the terminal.[EDID2:PC]Select this item mainly when the external device (such as computer) which outputs the still imagesignal is connected to the terminal, the terminal, the terminal, or the terminal.Notef The data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 210) for a resolution thatsupports plug and play.Setting [EDID MODE] in [SLOT IN] (DVI-D input)1) Press as to select [SLOT IN].2) Press the button.f The [SLOT IN] screen is displayed.3) Press as to select [EDID SETTING], and press the button.f The [EDID SETTING] screen is displayed.4) Press as to select [EDID MODE].5) Press the button.f The [DVI-D EDID MODE] screen is displayed.
