Chapter 4 Settings — [PICTURE] menuENGLISH - 83[USER1] Adjusts white balance as desired. Refer to “Adjusting desired white balance” (x page 83) fordetails.[USER2][3200K] - [9300K] Allows you to set in increments of 100 K. Select so that images become natural.Notef When [PICTURE MODE] (x page 81) is set to [USER] or [DICOM SIM.], [DEFAULT] cannot be selected.f When [COLOR MATCHING] (x page 101) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER1].f The color temperature numerical values are guidelines.Adjusting desired white balance1) Press as to select [COLOR TEMPERATURE].2) Press qw or the button.f The [COLOR TEMPERATURE] individual adjustment screen is displayed.3) Press qw to select [USER1] or [USER2].4) Press the button.f The [COLOR TEMPERATURE] screen is displayed.5) Press as to select [WHITE BALANCE].6) Press the button.f The [WHITE BALANCE] screen is displayed.7) Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].8) Press the button.f The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.9) Press as to select [RED], [GREEN], or [BLUE].10) Press qw to adjust the level.Item Operation Adjustment Range of adjustment[RED] Press w. Deepens red.[WHITE BALANCE HIGH]: 0 - +255 (factory default is+255)[WHITE BALANCE LOW]: -127 - +127 (factory default is0)Press q. Weakens red.[GREEN] Press w. Deepens green.Press q. Weakens green.[BLUE] Press w. Deepens blue.Press q. Weakens blue.Notef Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustmentdoes not look suitable, you can press the button on the remote control to return the setting for the selected item only to thefactory default setting.Adjusting desired white balance based on existing color temperature settings1) Press as to select [COLOR TEMPERATURE].2) Press qw or the button.f The [COLOR TEMPERATURE] individual adjustment screen is displayed.3) Press qw to select an item other than [DEFAULT], [USER1], and [USER2].4) Press the button.f The [CHANGE TO *****] screen is displayed.5) Press as to select [USER1] or [USER2].f The status of the color temperature changed is saved to the selected item.
