Panasonic System 850 Operating Instructions Manual

Also see for System 850: Brochure

Contents

112 On-Screen Display ControlThe procedure described below lets you determine the dis-play, such as camera title, clock and status, on and off onthe active monitor screen.Note: The following functions are not available when theon-screen displays are compounded from theCharacter Board that is installed on the Camera InputBoard. Confirm the setting in the AdministrationConsole for details.1. Select the desired monitor.Refer to the Monitor Selection.2. Pressing the [1] button while holding down the [OSD]button will toggle the clock (time and date) display onthe active monitor on and off.3. Pressing the [2] button while holding down the[OSD] button will toggle the camera title display onthe active monitor on and off.4. Pressing the [3] button while holding down the [OSD]button will toggle the general status display on theactive monitor on and off.Monitor Display Control07/07/1999 03:37:21 PMM AREA1 ALM T R AC CAMERA TITLEAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICECAM FUNCOSDOPE IDGROUP PRESETLOG OUTF1F2GENWIPERSYS SAUX2 OFFALM HMON STATUSAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ON07/07/1999 03:37:21 PMM AREA1 ALM T R AC CAMERA TITLEAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICECAM FUNCOSDOPE IDGROUP PRESETLOG OUTF1F2GENWIPERSYS SAUX2 OFFALM HMON STATUSAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ON07/07/1999 03:37:21 PMM AREA1 ALM T R AC CAMERA TITLEAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICECAM FUNCOSDOPE IDGROUP PRESETLOG OUTF1F2GENWIPERSYS SAUX2 OFFALM HMON STATUSAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ON