89 Group SequenceThe following function is available only if a Group Sequencehas been previously established through the AdministrationConsole.1. As described earlier, a Group Sequence determineswhich monitor is to be assigned to which camera.Therefore, selecting a monitor is not required.2. Select a desired Group Sequence Number by pressingthe Numeric keys.3. Press the [GROUP SEQ] key to run a group sequenceforward on the assigned monitors.The selected Group Sequence Number (G4) with “R”sign (indicate running status) is displayed on the activemonitor.4. To pause the sequence, select one of the monitors thatare being run on the selected group sequence, thenpress the [PAUSE] key.The “P” sign (indicating the pause status) is displayedat the Group Sequence Number on the assigned moni-tor.5. Press the [FWD RUN] key to restart a Group Sequenceforward from the next step that was previously pausedby pressing the PAUSE key.6. Press the [NEXT] key to move the sequence one frameto the next step from the step that was previouslypaused by pressing the PAUSE key.7. Press the [PREV] key to move the sequence one frameto the previous step from the step that was previouslypaused by pressing the PAUSE key.8. To stop the sequence, select one of the monitors thatare being run on the selected group sequence, thenpress the [STOP] key.INFORMATIONEntry:4INFORMATIONGrp Seq 4 Fwd RunCAM IDVLD ST&DALM S GENSYS S(ALARM)087MSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDVERMONITORLOCKOSD SERVICEINFORMATIONGrp Seq 4 Pause

PREFACE

PRECAUTIONS

OUTLINE OF THE SYSTEM 850 MATRIX SWITCHER

DETAILED PRODUCT DESCRIPTION

WJ-SX850 Matrix Switcher Card Cage

WJ-PB85X08 Camera Input Board

WJ-PB85D01 Character Board

WJ-PB85Y08 Loop-Through Board

WJ-PB85R08 RS-485 Data Board

WJ-PB85C16 Crosspoint Input Board

WJ-PB85M16 Crosspoint Output Board

WJ-PB85T08 OSD (On-Screen Display) Board

WJ-PB85A32 Alarm Input Board

WJ-PB85L32 Alarm Output Board

WJ-MPU850 Central Processing Unit

WJ-MPU855 Central Processing Unit

WV-CU850 System Controller

WV-CU350 System Controller

INSTALLATIONS AND SYSTEM CONNECTIONS

INSTALLATIONS

BOARD SELECTION FOR SYSTEM EXPANSION

SYSTEM CONNECTIONS

connection with the camera sites

connection with the monitors

OPERATING PROCEDURE (with WV-CU850)

Log-in and Log-out

Monitor and Camera Selection

priority lock

Display Setting for Controller

Controlling Camera Site Accessories

program preset position

receiver control

Camera Function Control

patrol learn and play

camera panning function

Running Sequence

group sequence

Monitor Display Control

system status table

alarm history table

video loss history table

Alarm Control

Other Functions

OPERATING PROCEDURES (when a WV-CU350 is connected)

SPECIFICATIONS

Panasonic System 850 Operating Instructions Manual

System 850