Panasonic System 850 Operating Instructions Manual

Also see for System 850: Brochure

Contents

93USRID: User IDNote: Alarm USRID consists of Alarm Number andAlarm Action Number.E.g. “ALM20” indicates alarm #2 and its action #0.PRTY: User Priority3. Press the [NEXT] key to select the next page of the sta-tus, and press the [PREV] key to back up to the previ-ous page.4. Press the [NEXT] key while holding down the [SHIFT]key to select the first page of the status, and press the[PREV] key while holding down the [SHIFT] key toselect the last page.5. Pressing the [0] key while holding down the [MONI-TOR] key will toggle the background camera imagesand black on the active monitor.6. To exit as it stands, select a new monitor.7. To exit from the mode, press the [CLEAR (ESC)] keywhile holding down the [MONITOR] key or select acamera to be displayed on the active monitor. Alarm History TableThere are 100 alarm records stored in chronological orderin 10 pages of table.1. Select a monitor for displaying the history.Refer to the Monitor Selection.2. Pressing the [4] key while holding down the [MONI-TOR] key will display the ALARM HISTORY table asshown in the figure on the active monitor.The columns in the table indicate the states as shownbelow.ALM: Logical Alarm NumberSTATE: Indicates alarm state changes.ARMED: The system is armed for alarm response.ACTIVE: Alarm has been triggered and activatedassigned alarm response.ACKED: Alarm is acknowledged and an operatorcan control the alarm action.RESET: Activated alarm is reset, but the alarmdevice is still active.DISARMED: The system is disarmed for alarmresponse.DATE-TIME: Date and time when alarm state changes.3. Press the [NEXT] key to select the next page of the his-tory, and press the [PREV] key to back up to the previ-ous page.4. Press the [NEXT] key while holding down the [SHIFT]key to select the first page of the history, and press the[PREV] key while holding down the [SHIFT] key toselect the last page.5. Pressing the [0] key while holding down the [MONI-TOR] key will toggle the background camera imagesand black on the active monitor.6. To exit as it stands, select a new monitor.7. To exit from the mode, press the [CLEAR (ESC)] keywhile holding down the [MONITOR] key or select acamera to be displayed on the active monitor.ALARM HISTORY PG 1ALM STATE DATE-TIME2 ARMED 03/21/00 10:172 ACKED 03/21/00 10:162 ACTIVE 03/21/00 10:151 ARMED 03/21/00 10:141 ACTIVE 03/21/00 10:141 ARMED 03/21/00 10:121 RESET 03/21/00 10:121 ACKED 03/21/00 10:111 ACTIVE 03/21/00 10:101 ARMED 03/21/00 9:50CAM IDVLD ST&DALM SGENSYS S(ALARM)087MSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDVERMONITORLOCKOSD SERVICE