Panasonic System 850 Operating Instructions Manual

Also see for System 850: Brochure

Contents

102Monitor and Camera SelectionAfter log-in, the following operations are available for con-trolling the system.The operation begins with selecting a monitor; then select acamera to be displayed on the active monitor screen. Monitor Selection1. Select the desired monitor number by pressing thenumeric buttons, then press the [MONITOR] button toexecute the selection.The MONITOR indicator on the controller is turned onand the selected monitor number is now displayed onthe LED display of the controller.If the selected monitor number is not valid or parti-tioned, the PROHIBITED indicator is on and the numberon the LED display will blink for about 3 seconds.Return to step 1 and select a new monitor number.2. Pressing the [NEXT] button while holding down the[MONITOR] button will select the next higher monitornumber, or pressing the [PREV] button while holdingdown the [MONITOR] button will select the next lowermonitor number.Note: The BUSY indicator lights, if the monitor is select-ed by a higher priority operator. Control of thesame monitor is denied to an operator with a lowerpriority. Camera Selection1. Select the desired monitor.Refer to the Monitor Selection.2. Select the desired camera number by pressing thenumeric buttons, then press the [CAMERA (ENTER)]button.The selected camera picture appears on the currentlyselected monitor and the selected camera number isnow displayed on the LED display of the controller.If the selected camera number is not valid or parti-tioned, the PROHIBITED indicator is on and the numberon the LED display will blink for about 3 seconds.Return to step 2 and select a new camera number.3. Pressing the [NEXT] button while holding down the[CAMERA (ENTER)] button will replace the currentlyselected camera with the next higher camera number,or pressing the [PREV] button while holding down the[CAMERA (ENTER)] button will replace the currentlyselected camera with the next lower camera number.Note: The BUSY indicator lights, if the camera isselected by a higher priority operator. Control ofthe same camera is denied to an operator with alower priority.AUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONMON STATUSNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICEOSDAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICEOSDGENWIPERSYS SAUX2 OFFALM HMON STATUSAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONPROGRAMPRESETCALLPRESETAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONCAMERA(ENTER)AUTOPANMON STATUSPROGRAMPRESETCALLPRESETAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONCAMERA(ENTER)AUTOPANMON STATUSNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICEOSD