85Camera Function Control Camera SetupThe following function requires the use of camerasequipped with this specific feature.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Pressing the [F4] key while holding down the [SHIFT]key will gain access to the Camera Setup Menu displayon the active monitor.3. Select the desired item in the menu by moving theJoystick Controller UP and DOWN, and then select thedesired parameter (or mode) in the menu by movingthe Joystick Controller L and R.Press the [CAMERA (ENTER)] key to execute the cur-rently highlighted selection and to enter a submenu ofthe Camera Setup Menu, or press the [CLEAR (ESC)]key to leave the currently selected menu and return tothe previous page of the menu.4. Press the [RESET] key in the menu to reset the para-meter of a selected item to the factory default setting orenter the Special Camera Menu when the cursor ispositioned on SPECIAL in the menu.Pressing the [RESET] key while holding down the[SHIFT] key will restore all factory default settings.Notes:• Refer to the Operating Instructions of the selectedcamera for more details.• Moving the joystick while holding down the [SHIFT]key will move the camera smoothly for presettingthe position in the camera setup menu.5. To close the Camera Setup Menu, press the [F3] keywhile holding down the [SHIFT] key. Camera Function (ShortcutFunction)The following function is available only when specified cam-eras with the camera function feature are used.This function enables executing camera functions via ashortcut.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Press the [F6] key.“Camera Function” as shown in the figure will appearon the LCD display of the controller.3. Select an assigned function number by pressing thenumeric keys, then press the [CAMERA (ENTER)] key.For example, enter 175 for AGC On.The selected function will be executed on the activemonitor.Note: For further information, refer to the OperatingInstructions for that camera.4. To exit from the mode, press the [CLEAR (ESC)] key.INFORMATIONCam Menu OnALARM ACK RESETALLRESETARMGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDF.1 F.2 F.3CMENUOFFF.4CMENUONF.5 F.6CLOSEIRISWIPEROPENNEAR FA RWIDE TELEAUTO FOCUSZOOMMONITORLOCKOSD SERVICELOGOUTAUX1 OFF AUX1 ONCALLPRESET PGMPRESETC A MP O S ID I G I TA LO U TCAM IDVLD ST&DALM S GENSYS S(ALARM)087DEF OFF DEF ONMSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITAREAAUX2 OFF AUX2 ONDEFAULTFOCUSVERCAMFUNCCAMERA(ENTER)AUTO PANINFORMATIONCamera Function-----INFORMATIONCamera Function--175ARM F.1 F.2 F.3CMENUOFFF.4CMENUONF.5 F.6CLOSEIRISWIPEROPENNEAR FA RWIDE TELEAUTO FOCUSZOOMLOGOUTAUX1 OFF AUX1 ONCALLPRESET PGMPRESETC A MP O S ID I G I TA LO U TCAM IDVLD ST&DALM S GENSYS S(ALARM)087DEF OFF DEF ONMSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITAREAAUX2 OFF AUX2 ONDEFAULTFOCUSCAMFUNCCAMERA(ENTER)AUTO PAN