Panasonic System 850 Operating Instructions Manual

Also see for System 850: Brochure

Contents

117Alarm ControlWhen cameras and monitor are armed for alarm responsewith an alarm inputs, the camera pictures associated withthat alarm input is displayed on the monitor when the alarmis received.When an alarm is received, the ALARM indicator lights. Theindicator remains lit until all alarms are cleared by pressingthe RESET button. Alarm Arming Control1. Select an alarm number by pressing the numeric but-tons, followed by the [ALARM] button.2. Pressing the [ALARM] button repeatedly will arm ordisarm cameras and monitor for alarm response withthe selected alarm.The DISARM indicator will light on the controller whenthe alarm disarm mode is selected.3. Pressing the [NEXT] button while holding down the[ALARM] button will select the next higher alarm num-ber, or pressing the [PREV] button while holding downthe [ALARM] button will select the next lower alarmnumber.4. Pressing the [ALARM] button repeatedly will arm ordisarm cameras and monitor for alarm response withthe selected alarm.5. To exit from alarm selecting mode, press the [CLEAR(ESC)] button. To Cancel Alarms1. Select an activated alarm number that is displayed onthe active monitor by pressing the numeric buttons, fol-lowed by the [ALARM] button.2. Select the alarm action number by pressing the numer-ic button, then press the [ACK] button to acknowledgethe activated alarm manually.The acknowledged alarm picture is displayed on theactive monitor, and the ACK indicator on the controlleris turned on.Note: By the factory default setting, pressing only the[ACK] button will interpret it as the alarm action #0.3. After acknowledging the alarm, press the [RESET] but-ton to reset the alarm.The ACK indicator will go off.Note: All reset function is available without selectingthe activated alarms. Pressing the [RESET] buttonwhile holding down the [SHIFT] button will cancelall currently activated alarms at once.RESETACKALARMDISARM ALL RESETNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICECAM FUNCOSDOPE IDGROUP PRESETLOG OUTF1F2AUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONMON STATUS RESETACKALARMDISARM ALL RESETNEXTPREVS-CTL IDSTOPPAUSECAM MENU ONCAM MENU OFFTOURSEQGROUPSEQMONITORLOCKOSD SERVICECAM FUNCOSDOPE IDGROUP PRESETLOG OUTF1F2AUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONMON STATUS