Panasonic System 850 Operating Instructions Manual

Also see for System 850: Brochure

Contents

94 Video Loss History TableThere are 100 video loss detection records stored inchronological order in 10 pages of table.1. Select a monitor for displaying the history.Refer to the Monitor Selection.2. Pressing the [5] key while holding down the [MONI-TOR] key will display the VIDEO LOSS HISTORY tableas shown in the figure on the active monitor.The columns in the table indicate the states as shownbelow.LCAM: Logical camera number that is connected tothe system.STATE: Indicates video loss changes.OK: Video loss is recovered.LS: Video level is below normal and in sync.VL: Video level is below normal and out of sync.HL: Video level is above normal and out of sync.TYPE: Place where the video loss occurs.S: MXSW inputC: MXCONT inputDATE-TIME: Date and time when the video loss statechanges.3. Press the [NEXT] key to select the next page of the his-tory, and press the [PREV] key to back up to the previ-ous page.4. Press the [NEXT] key while holding down the [SHIFT]key to select the first page of the history, and press the[PREV] key while holding down the [SHIFT] key toselect the last page.5. Pressing the [0] key while holding down the [MONI-TOR] key will toggle the background camera imagesand black on the active monitor.6. To exit as it stands, select a new monitor.7. To exit from the mode, press the [CLEAR (ESC)] keywhile holding down the [MONITOR] key or select acamera to be displayed on the active monitor.VIDEO LOSS HISTORY PG 1LCAM STATE TYPE DATE-TIME2 OK S 03/21/00 10:172 LS S 03/21/00 10:162 OK S 03/21/00 10:151 OK C 03/21/00 10:143 OK C 03/21/00 10:145 VL C 03/21/00 10:121 VL C 03/21/00 10:123 VL C 03/21/00 10:115 VL S 03/21/00 10:101 OK C 03/21/00 9:50CAM IDVLD ST&DALM S GENSYS S(ALARM)087MSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU NF W DRU NOSDVERMONITORLOCKOSD SERVICE