86 Changing to Black and WhitePicturesThe following function is available only when specified cam-eras having a color-black and white switching feature areused.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Press the [F6] key two times.“B/W Change” as shown in the figure will appear onthe LCD display of the controller.3. Press the [1] key to change the picture from color toblack and white on the active monitor.4. Press the [2] key to change black and white to colorpicture on the active monitor.5. To exit from the mode, press the [CLEAR (ESC)] key.Note: When the black and white parameter is setAUTO in the camera setup menu, this function isdisabled. Patrol Learn and PlayThe following function requires the use of camerasequipped with this specific feature.A routine of manual operations can be stored for a specifictime and later reproduced repetitively.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Press the [F6] key three times.“Patrol Learn” as shown in the figure will appear on theLCD display of the controller.To save the patrol sequence, follow the procedureshown below.q Press the [2] key, then press the [CAMERA(ENTER)] key to start Patrol Learn.w Operate the camera manually. Operations data(patrol sequence) is stored.e Press the [3] key to end the learning.To reproduce the stored data, follow the procedureshown below.q Press the [1] key to reproduce the stored Patrolfunction.w Press the [3] key to end the reproduction.3. To exit from the mode, press the [CLEAR (ESC)] key.INFORMATIONB/W change1:On2:OffARM F.1 F.2 F.3CMENUOFFF.4CMENUONF.5 F.6CLOSEIRISWIPEROPENNEAR FA RWIDE TELEAUTO FOCUSZOOMLOGOUTAUX1 OFF AUX1 ONCALLPRESET PGMPRESETC A MP O S ID I G I TA LO U TCAM IDVLD ST&DALM S GENSYS S(ALARM)087DEF OFF DEF ONMSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITAREAAUX2 OFF AUX2 ONDEFAULTFOCUSCAMFUNCCAMERA(ENTER)AUTO PANINFORMATIONPatrol Learn1:Play2:Learn(2+Enter)3:StopARM F.1 F.2 F.3CMENUOFFF.4CMENUONF.5 F.6CLOSEIRISWIPEROPENNEAR FA RWIDE TELEAUTO FOCUSZOOMLOGOUTAUX1 OFF AUX1 ONCALLPRESET PGMPRESETC A MP O S ID I G I TA LO U TCAM IDVLD ST&DALM S GENSYS S(ALARM)087DEF OFF DEF ONMSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITAREAAUX2 OFF AUX2 ONDEFAULTFOCUSCAMFUNCCAMERA(ENTER)AUTO PAN