Panasonic System 850 Operating Instructions Manual

Also see for System 850: Brochure

Contents

90 On-Screen Display ControlThe procedure described below lets you determine the dis-play, such as camera title, clock and status, on and off onthe active monitor screen.Note: The following functions are not available when theon-screen displays are compounded from theCharacter Board that is installed on the Camera InputBoard. Confirm the setting in the AdministrationConsole for details.1. Select the desired monitor.Refer to the Monitor Selection.2. Pressing the [1] key while holding down the [OSD] keywill toggle the clock (time and date) display on theactive monitor on and off.3. Pressing the [2] key while holding down the [OSD] keywill toggle the camera number and title display on theactive monitor on and off.4. Pressing the [3] key while holding down the [OSD] keywill toggle the general status display on the active mon-itor on and off.Monitor Display Control07/07/1999 03:37:21 PMM AREA1 ALM T R AC CAMERA TITLECAM IDVLD ST&DALM S GENSYS S(ALARM)087MSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDVERMONITORLOCKOSD SERVICE07/07/1999 03:37:21 PMM AREA1 ALM T R AC CAMERA TITLECAM IDVLD ST&DALM S GENSYS S(ALARM)087MSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDVERMONITORLOCKOSD SERVICE07/07/1999 03:37:21 PMM AREA1 ALM T R AC CAMERA TITLECAM IDVLD ST&DALM S GENSYS S(ALARM)087MSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDVERMONITORLOCKOSD SERVICE