47WV-CU850 System Controller Appearance Front ViewALARM ACK RESETALLRESETARMGROUPPRESETPREVS-CTL IDOPE IDNEXTGROUPSEQ PAUSE STOPTOURSEQ R E VRU N F W DRU NOSDF.1 F.2 F.3CMENUOFFF.4CMENUONF.5 F.6CLOSEIRISWIPEROPENNEAR FA RU PBUSYAC K LOCKCAMERAINFORMATIONMONITORALARM LINK OPERATEDOWNRLWIDE TELEAUTO FOCUSZOOMMONITORLOCKOSD SERVICELOGOUTAUX1 OFF AUX1 ONCALLPRESET PGMPRESETC A MP O S ID I G I TA LO U TCAMERA(ENTER)CAM IDVLD ST&DALM S GENSYS S(ALARM)087DEF OFFAUTO PANDEF ONMSTATUSVLD HALLALM HBLK59642 31SHIFTCLEAR(ESC)EXITSystem Controller WV–CU 850BUSYAREAAUX2 OFF AUX2 ONDEFAULTFOCUSVERCAMFUNCq rw e t y u i o !0!1 !2 !3 !4 !5!6!7!8!9@0@1@5@7@8@22@4@3@6#1#2#3#6@9#4 #0#5#8#7#9$0q Alarm Acknowledge indicator (ACK)Lights up (red) when the activated alarm is acknowl-edged.w Monitor Busy indicator (BUSY)Lights up (red) when you attempt to control a monitorthat is already used by a higher priority operator, orwhen a higher priority operator selects the monitor youare currently operating.Operations from the System Controller are disableduntil this indicator goes off.e Monitor LED Display (MONITOR)Displays the Monitor Number currently controlled.r Monitor Lock Indicator (LOCK)Lights (red) to indicate that the currently selected moni-tor is priority locked, and retains control of a monitor byan operator.Pressing the MONITOR key, while holding down theSHIFT key, will toggle the indicator on and off.t LCD (Liquid Crystal Display) Display(INFORMATION)Displays numeric input, system status, general status,etc.y Camera Busy indicator (BUSY)Lights up (red) when you attempt to control a camerathat is already used by a higher priority operator, orwhen a higher priority operator selects the camera youare currently operating.Operations from the System Controller are disableduntil this indicator goes off.u Camera LED Display (CAMERA)Displays the Camera Number currently controlled.i Alarm Indicator (ALARM)Lights (red) to indicate that an alarm condition exists.To turn off the indicator, select the alarm by pressingthe Numeric and ALARM keys, then press the RESETkey.