Panasonic System 850 Operating Instructions Manual

Also see for System 850: Brochure

Contents

100Before starting the following procedures, all system compo-nents must be turned on.The following procedures apply when the WV-CU350System Controller is connected to the system. Log-in1. Turn on the power switches of all system components.2. Turn on the power of the WV-CU350 System Controllerby connecting the AC adapter to the AC outlet.The LINK indicator lights up and “NO USER” willappear on the LED display of the system controller.3. Select your registered operator ID number (up to 5 dig-its) by pressing the numeric buttons, then press the[CAMERA (ENTER)] button.The underline display now appears on the LED displayof the controller.4. Select your registered Password (up to 5 digits) bypressing the numeric buttons, then press the [CAM-ERA (ENTER)] button.If operator ID and password are correct, “READY” willappear on the LED display.Note: If an operator ID and password error haveoccurred, the PROHIBITED indicator on the con-troller will light up and “NO ACCESS” will blink onthe LED display for about 3 seconds. Then theLog-in procedure automatically returns to the start.Log-in and Log-outPROGRAMPRESETCALLPRESETAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONCAMERA(ENTER)AUTOPANMON STATUSPROGRAMPRESETCALLPRESETAUX1 OFFALM SCAM IDT&DAUX1 ONVLD SGENWIPERSYS SAUX2 OFFALM HAUX2 ONVDL HALLSHIFT BLK EXITCLEAR(ESC)DEF OFF DEF ONCAMERA(ENTER)AUTOPANMON STATUS