5PRECAUTIONS• Refer all work related to the installation of this prod-uct to qualified service personnel or systeminstallers.• Do not block the ventilation opening or slots on thecover.To prevent the appliance from overheating, place it atleast 5 cm (2 inches) away from the wall.• Do not drop metallic parts through slots.This could permanently damage the appliance. Turnthe power off immediately and contact qualified servicepersonnel for service.• Do not attempt to disassemble the appliance.To prevent electric shock, do not remove screws orcovers.There are no user-serviceable parts inside. Contactqualified service personnel for maintenance.• Handle the appliance with care.Do not strike or shake, as this may damage the appli-ance.• Do not expose the appliance to water or moisture,nor try to operate it in wet areas.Take immediate action if the appliance becomes wet.Turn the power off and refer servicing to qualified ser-vice personnel. Moisture may damage the applianceand also cause electric shock.• Do not use strong or abrasive detergents whencleaning the appliance body.Use a dry cloth to clean the appliance when it is dirty.When the dirt is hard to remove, use a mild detergentand wipe gently.• Do not operate the appliance beyond its specifiedtemperature, humidity or power source ratings.Use the appliance at temperatures within –10°C -+50°C (14°F - 122°F) and a humidity below 90%.The input power source for these appliances is 120 VAC 60 Hz.