Chapter 3: Configuring Your LibraryConfiguring Drive CleaningQuantum Scalar i6000 User’s Guide 2314 When complete, a dialog displays indicating if the import wassuccessful.The cleaning media are moved to an available cleaning magazine,and can be used for drive cleaning.5 Click OK. On the Import Cleaning Media window, the cleaningtape will be highlighted green.6 Click Cancel to close the Import Cleaning Media window.Note: If you are working on the remote LMC, you can right-click amagazine slot or a piece of cleaning media to see a menu ofavailable options.Exporting CleaningMediaCleaning media can be used a limited number of times. If a cleaningtape is expired, export it and remove it from the library. There are twoways to export cleaning media:• From the Cleaning Slots dialog, or• From the Export Cleaning Media... dialogExporting Cleaning Media from the Cleaning Slots dialog1 Make sure that you are viewing the physical library. From the Viewmenu, click the name of the physical library.2 Select Setup > Cleaning Slots. The Cleaning Slot Configurationdialog box appears. If the library has more than one module, clickthe arrow buttons to display the next or previous module.Note: To determine the number of cleanings the cleaning mediahas performed, click the media to select it, and then checkthe Mount Count value under Information.3 Click the cleaning media in a cleaning magazine to select it, andthen do one of the following:• To export only the selected piece of media, click Menu, and thenclick Export cleaning media .• To export all media in the selected magazine, click Menu, andthen click Export all cleaning media in magazine.
