Chapter 3: Configuring Your LibraryConfiguring Library SecurityQuantum Scalar i6000 User’s Guide 235Removing anApplication’s TrapRegistration1 Log on as an administrator.2 Make sure that you are viewing the physical library. From the Viewmenu, click the name of the physical library.3 Click Setup > Notifications > Trap Registration. The TrapRegistration dialog box appears.4 Click the IP address of the application for which you want to removetrap registration to highlight it.5 Click Delete.Configuring Library SecurityYou can change the library’s security settings, including enabling ordisabling network services, enabling or disabling remote access to thelibrary, setting up firewall access for server callbacks to remote clients,and enabling or disabling SNMP or SMI-S access. You can configure thelibrary’s security while viewing either the physical library or a partition.Note: Changing security configuration settings using the remoteclient might cause a loss of connectivity. If this happens, usethe local touch panel to reset the security configurationsettings and restore remote connectivity.Accessing the SecurityConfiguration DialogBoxThe Security Configuration dialog box enables you to restrict externalusers and various remote services from accessing the library through theEthernet port on the MCB.1 Log on as an admin user.2 Click Setup > Security. The Security Configuration dialog boxappears with the Services tab displayed.
