Chapter 16: Working With Cartridges and BarcodesManaging and Moving Media702 Quantum Scalar i6000 User’s Guide5 Click the destination drive to receive the media to highlight it. TheSelect Drive area is populated with empty drives. You can selectonly one drive at a time.6 To load the data cartridge into the selected drive, click OK.Unloading Drives The Unload Drives dialog box enables you to rewind the cartridge inthe drive, eject it, and return it to storage.1 Make sure that you are viewing the partition from which you wantto unload drives. From the View menu, click the name of theappropriate partition.2 Click Operations > Drives > Unload. The Unload Drives dialogbox appears.3 If you want to display media IDs by media type, click theappropriate media type from the Media Type drop-down list.4 Click the drive you want to unload to highlight it. You can onlyunload one drive at a time.The parameters used to define a cartridge are media ID (volumeserial number) and location. Location is defined as a series ofcoordinates representing the aisle, module, rack, section, column,and row where a cartridge is located. SeeUnderstanding LocationCoordinates on page 459.5 Click OK. The library rewinds the data cartridge, unloads it from thedrive, and returns it to storage.
