Chapter 13: Running Your LibraryLogging On and Off436 Quantum Scalar i6000 User’s GuideLogging Off From theTouch Screen (LocalClient)1 Select Operations > Log Off or select the Log Off button on thetoolbar. A message appears that asks you whether you are sure thatyou want to log off.2 Select Yes. The Scalar i6000 Logon dialog box appears.Logging On From aWeb Browser (RemoteClient)You can access all features of the LMC from a host computer using astandard Web browser. The host computer must have network access tothe library, and you must know the IP address of the library.Note: If you do not know the IP address of the library, log on to thelibrary using the touch screen. Click Setup > NetworkConfiguration, and then write down the value in the IPAddress field.Software RequirementsBefore logging on from the Web browser, make sure the host computermeets the following software requirements:• Web Browser – Microsoft Internet Explorer 7 or 8; Mozilla Firefox1.0.6 or higher• Java Plug-in – Java Plug-in 1.4 or higherFor information on downloading the Java Plug-in contact:www.quantum.com/supportAccessing the Library via the Web BrowserAfter verifying that the host computer meets the software requirementsand has network access to the library:1 On the host computer, point your Web browser to the IP address ofthe library.The first time you access the library, an LMC applet is downloadedto the host computer. Downloading the applet can take severalminutes depending on the speed of the network. Once the applet isdownloaded, it is stored on the host computer and does not needto be downloaded again.
