Chapter 15: Maintaining Your LibraryMonitoring the Library532 Quantum Scalar i6000 User’s Guidedown list also is grayed out and selections cannot be made fromit.These selections correspond to location coordinates for thephysical library. For example, to select all slots in the drive-siderack of the control module, click 1 for module, 1 for rack, All forsection, All for column, and All for row. For more informationabout location coordinates, see Understanding LocationCoordinates on page 459.• To specify slots by media type, click All or a specific media type,such as LTO, from the Slot Type drop-down list. Only mediatypes that are currently used in the library appear in the drop-down list. The default is set to All.• To specify slots by slot state, click All, Occupied, or Empty fromthe State drop-down list. The default is set to All.2 Click Show.Monitoring MediaStatusThe Media Status dialog box displays detailed information about themedia in the currently selected partition. If you are working in thephysical library, you can view status information for all media. Becausethe number of media in a physical or partition can be quite large, youcan select a subset of the available slots. You can perform this procedurewhile viewing either the physical library or a partition.1 Click Monitor > Media. The Media Status dialog box appears.
