Raymarine ST70+ Operating Manual

Also see for ST70 Instrument: Installation guide User reference guide User reference handbook Installation guide Operating guide

Contents

Raymarine ST70+ Operating Manual Manual pdf 23 page image

Chapter 2: Commissioning Procedures 15Setting Vessel TypeThe Vessel Type menu enables you to automaticallyapply the optimum system settings for your vesseltype. The options are:*Power Cruiser settings. Note that the Power Cruiser settings apply as follows:• Power Cruiser 1 - vessels capable of speeds up to 12 knots.• Power Cruiser 2 - vessels capable of speeds up to 30 knots.• Power Cruiser 3 - vessels capable of speeds greater than 30 knots.Select typeScroll to select the vessel type that most closely corresponds to your vessel.When you have chosen the vessel type, press OK to confirm the choice. The Timeand Date values and the data Units considered most appropriate for the Languageand Vessel Type you chose, are then automatically applied to your ST70+ system andan automatic check of system parameters is carried out. On completion, a Systemconfiguration page is present all displays in the system.Setting display types and groupsYou must now:• Select the display you want to set up.• Set the display type for each display (Instrument or Pilot Controller).• Allocate each display to a group.• Set the sequence number of each display within the group.• Link at least one keypad to each group.To do this:1. With the System configuration page displayed,press OK to display the Configure this displaypage.For unassigned displays (e.g. at first switchon), the legends Group and Number are dis-played. If the selected display has alreadybeen set up, this shows the current group andnumber in the group for the selected display.2. Use the Select Display button as necessary, tomove the screen highlight to the display you want to set up, i. e. so it is the selecteddisplay.• Race Sail • Inboard Speed Boat• Sail Cruiser • Power Cruiser 1*• Catamaran • Power Cruiser 2*• Workboat • Power Cruiser 3*• RIB • Sport Fishing• Outboard Speed Boat • Pro FishingiD11141-1Vessel TypeInboard SpeedboatSelecting vessel type helps us toconfigure your system.Press OK to selectiD11143-1Press OK to configure this displayConfigure this displayGroupNumberSelect each display in turn. Press OK toconfigure. When all done, press MENU.