Raymarine ST70+ Operating Manual

Also see for ST70 Instrument: Installation guide User reference guide User reference handbook Installation guide Operating guide

Contents

Raymarine ST70+ Operating Manual Manual pdf 27 page image

Chapter 2: Commissioning Procedures 19Data unitsThe Units summary comprises two pages andshows units currently in use. You can accept all orchange any of the data unit settings. You can set:.• Speed to either miles per hour, kilometers perhour or knots.• Distance to either miles, nautical miles orkilometers• Depth to either feet, fathoms or meters.• Wind speed to either knots or meters persecond.• Heading to either magnetic or true.• Flow rate to either US gallons per hour, UK gallons per hour or liters per hour• Temperature to degrees Celsius or degrees Fahrenheit.• Pressure to pound per square inch or kilo Pascals.• Volume to either US gallons, UK gallons or liters• Number of engines to either 1, 2, 3, 4 or 5.• Number of batteries to either 1, 2, 3, 4 or 5.• Number of fuel tanks to either 1, 2, 3, 4 or 5.Press OK to see the second Units summary page, and if you want to return to the firstpage from the second, press CANCEL.Check the information on the Units summarypages, then with the second Units summary pagedisplayed, press OK to display the Select unitsmenu.If you want to change any data units, carry out theChanging units procedure below.If you do not want to change any data units,proceed from Leaving units setup below.Changing unitsTo change any data units:1. With the Select units menu displayed, scroll to select the type of data you want tochange, i.e. Speed, Depth, Distance, Wind Speed etc.2. Press OK to display the setup page for the unitsyou have selected.3. Scroll to select the required units.4. Press OK to save the units setting and return tothe first Units summary page.5. Press OK twice, to display the Select unitsmenu.6. If you want to change any other units, repeatsteps 1 to 5 of this procedure.6 ptiD11159-1Press OK to continueUnits summaryThese are your current settings.oKTSSpeedNMDistanceFTDepthKTSWind SpeedMagHeadingG/HFlow RateCTemperatureiD11161-1Select unitsWind Speed UnitsSelect units to change, using <or >.Press OK to selectiD11106-1Press OK to acceptWind Speed UnitsKTSSelect required units, using < or>. CANCEL exits without saving.