56 ST70+ User Reference ManualGybe inhibitWith gybe inhibit disabled:• You will be able to perform an AutoTack into the wind• The autopilot will not perform an AutoTack away from the wind, to prevent acci-dental gybesWith gybe inhibit enabled, you can perform an AutoTack into or away from the wind.To set Gybe inhibit:1. With the Sailboat settings menu displayed, use the Preliminary procedure aboveto display the Gybe inhibit page.2. Scroll to the required setting.3. Press OK to save the setting and return to the Drive settings menu.Wind typeNote: Only available if wind data is available.Use the Wind type page to determine whether the boat steers to apparent or true windin Wind Vane mode. To do this:1. With the Sailboat settings menu displayed, use the Preliminary procedure aboveto display the Wind type page.2. Scroll to select either True or Apparent as required.3. Press OK to save the setting and return to the Drive settings menu.WindTrim responseWindTrim response determines how quickly the autopilot responds to changes in thewind direction. Higher response settings make the autopilot more responsive to windchanges.The values are:• 1 to 3 - Least responsive to wind changes, therefore less autopilot activity.• 4 to 6 - Moderate response to wind changes• 7 to 9 - Most responsive to wind changes, therefore more autopilot activity.To set the WindTrim response:1. With the Sailboat settings menu displayed, use the Preliminary procedure aboveto display the WindTrim response page.2. Scroll to the required setting.3. Press OK to save the setting and return to the Drive settings menu.Setting up fishing patternsFishing patterns are available on Power and Fishing Boat vessel types. You canchange the parameters of any fishing pattern to obtain the coverage you want..For each pattern, you can set the direction of travel