Raymarine ST70+ Operating Manual

Also see for ST70 Instrument: Installation guide User reference guide User reference handbook Installation guide Operating guide

Contents

Raymarine ST70+ Operating Manual Manual pdf 26 page image

18 ST70+ User Reference ManualSetting time formatTo set the required time format:1. With the Time & Date setup menu displayed,scroll to select the Time Format option, thenpress OK to display the Set time format page.2. Scroll to the required Time Format, then pressOK to save the format and return to the Time &Date summary page.3. Press OK to select the Time & Date setup menu.Setting local timeNote: If your ST70+ display is connected to a Raymarine multi-function display, then the time offset is controlled by themultifunction display and you cannot use this procedureto change it.To set the display time to your local time.1. At the Time & Date setup menu, use < and > toselect the Set time offset option, then press OK,to display the Set time offset page.2. Scroll to set the correct local time. Forexample, if your local time is 1 hour after GMT,set -1.3. Press OK, to save the setting and return to theTime & Date setup menu.Leaving date & time setupWhen your date and time formats and values areset as required:1. At the Time & Date setup menu, scroll to theContinue option.2. Press OK to proceed to the Units summarypage.3. Proceed from Data units (below).D11155-1Time & DateSet time formatPress OK to select10iD11156-1Press OK to acceptSet time formatUse < & > to adjust.CANCEL exits without saving.12-hourD11157-1Time & DateSet time offsetPress OK to selectiD11158-1Press OK to acceptSet time offsetUse < & > to adjust.CANCEL exits without saving.-1 hourD11150-1Time & DateContinuePress OK to select10