Raymarine ST70+ Operating Manual

Also see for ST70 Instrument: Installation guide User reference guide User reference handbook Installation guide Operating guide

Contents

Raymarine ST70+ Operating Manual Manual pdf 66 page image

58 ST70+ User Reference Manual4. The Pattern settings screen is displayed, showing the parameters currently setfor the selected pattern. If you want to change any of the parameters:i. Select the parameter you want to change,then press OK to select the setup screen.ii. Use the Rotary Control to set the value youwant, then press OK to save the setting andreturn to the Pattern settings screen.iii. Repeat steps 1 and 2 as necessary, for otherparameters.3.4 System configurationThe system configuration determines the function of each display (Instrument or PilotController) and the manner in which displays and keypads are grouped.Changing system configurationThe system configuration is set during commissioning to provide an optimum systemfor the boat. It should not normally need to be changed, unless you make majorchanges to the boat or to the way you operate it. Before making any changes to thesystem configuration, carefully plan the changes you want to make.To change the configuration of the ST70+system:1. At any display, press MENU to display the Main menu.2. Scroll to Advanced options then press OK to display the Advanced options menu.3. Scroll to Setup wizard.This is the last point at which you can decide not to go ahead with changing thesystem configuration. If you want to abandon the process, press CANCEL.4. Otherwise, press OK to start the setup wizard.5. Referring to Chapter 2:Commissioning Procedures, carry out the Initial setup pro-cedure from Selecting language to Leaving units setup (pages 14 to 20).WARNING:Do not change the configuration of ST70+ unless the boat is securelytied up alongside, with engines off.iPress OK to acceptRadius150Adjust the pattern radius.meters