Raymarine ST70+ Operating Manual

Also see for ST70 Instrument: Installation guide User reference guide User reference handbook Installation guide Operating guide

Contents

Raymarine ST70+ Operating Manual Manual pdf 40 page image

32 ST70+ User Reference Manual5. If you selected the OFF or SLAVE mode, proceed from step 6. If you selected theON mode:i. Press PAGE DN to select the lower (value) box.ii. Scroll to set the correct variation value.6. Press OK to save the value and return to the Advanced Options menu.7. Press CANCEL to return to the Main Menu.Now proceed to Changing response rate.Changing display response rateThe display response rate determines the rate at which data readings update. Youcan adjust the response independently for each display and for individual data types,to best suit the conditions under which you are operating.If you want to change the response at any instrument:1. With the Main Menu displayed, scroll to DisplaySettings.2. Press OK to display the Display Settings menu.3. At the Display Settings menu, scroll to theResponse option.4. Press OK to display the Response menu, thenscroll to the required data type (Speed shownhere).5. Press OK to display the response adjust box forthe data you have selected.6. Scroll to set the response rate. A higher valuegives a quicker response rate and vice versa.7. Press OK to save the value and return to theResponse menu.8. If you want to change the response for otherdata types, scroll to the required data type, thenrepeat steps 5 to 7.9. To leave response setup, ensure the Response menu is displayed, then:i. Press CANCEL to return to the Display Settings menu.ii. Press CANCEL to return to the Main Menu.iii. Press CANCEL to return to the operational page.iD11184-1Display SettingsResponseSelect display response.Press OK to selectD11185-1ResponseSpeedPress OK to selectiD11186-1Press OK to acceptSpeed12< & > adjust response level.CANCEL exits without saving.