![Tascam 16 Owner's Manual Manual pdf 22 page image](https://manuals-archive2.s3.amazonaws.com/4498462/d1829934da0c4a424a9267604410f21b22f.jpg)
2 - Names and Functions of PartsInput channel mixing sectionq MODE switches (1-8, 9/10-11/12, 13/14)Use these to select the input source for each channel. (See“Setting the MODE switch” on page 38)w COMP knobs and indicators (1-8)Use these knobs to adjust the compression thresholds for thesignals input to each channel.When compression is activated, the COMP indicators light.e EQ knobs (1-8, 9/10-11/12)i Use these to boost and attenuate the HIGH, MID and LOWbands of each channel.Setting range: ±15 dBi The central frequencies of the MID bands can be set forchannels 1-8.Setting range: 100 Hz - 8 kHz (default: 600Hz)i Channels 9/10-11/12 are fixed at 2.5 kHz.r MON 1/MON 2 knobs (1-8, 9/10-11/12, 13/14)Use these to adjust the levels of signals sent to the MONITOROUT 1/2 buses.t POST switches (1-8, 9/10-11/12, 13/14)Turn these switches on to send signals to the MONITOR OUT2 bus after the channel faders.y FX knobs (1-8, 9/10-11/12)Use to adjust the levels of the signals sent to the FX bus.u PAN knobs (1-8, 9/10-11/12, 13/14)Use to adjust the stereo positions of the signals input to eachchannel.NOTEi When PAN knobs are centered (C), signals are reduced by 3dB and sent to both left and right MAIN MIX L/R buses.i When a PAN knob is turned all the way to the left (L), thatchannel signal is sent only to the left MAIN MIX L/R bus. It isnot sent to the right bus.i When a PAN knob is turned all the way to the right (R), thatchannel signal is sent only to the right MAIN MIX L/R bus. It isnot sent to the left bus.i REC buttons and indicators (1-8, 9/10-11/12, 13/14)Use these to select the channels to record to the SD card.o MUTE switches and indicators (1-8, 9/10-11/12, 13/14)When these switches are on (pushed in, MUTE indicator lit),those channels are muted.p Channel faders (1-8, 9/10-11/12, 13/14)Use these to adjust the send levels of channel signals.a MAIN switches (1-8, 9/10-11/12, 13/14)Turn these switches on (pushed in) to send channel signals tothe MAIN MIX L/R bus.s SUB switches (1-8, 9/10-11/12, 13/14)Turn these switches on (pushed in) to send channel signals tothe SUB L/R bus.d PFL switches (1-8, 9/10-11/12, 13/14)Turn these switches on (pushed in) to send channel signals tothe PFL/AFL L/R bus.f ON/MUTE switchSet this switch to ON to input audio from a paired Bluetoothdevice.g PAIRING button and indicatorPress and hold this button to activate Bluetooth pairingmode.Press when pairing to end pairing mode. (See “Connectingwith Bluetooth devices” on page 31)22 TASCAM Model 16