Tascam 16 Owner's Manual

Also see for 16: Manual Owner's manual

2 - Names and Functions of Parts9 Automatic punch in/out point setting statusWhen the automatic punch in/out function is on, these showthe status of automatic punch in/out point setting.Punch in pointPunch out point0 Remaining timeThe remaining time available for recording on the SD card isshown (in hours: minutes: seconds).NOTEThe remaining time that can be recorded on an SD cardvaries according to the number of recording channels, songformat and SD card capacity.q Built-in effect statusWhen a built-in effect is on, the number of the effect in use isshown.When the built-in effect is off, the icon appears. (See“Using the built-in effects” on page 40)w Recorder time counterThis shows the elapsed time from the beginning of the song.e Mark indicatorsAn icon is shown at each mark.r Song lengthThis shows the length of the current song (in hours: minutes:seconds).t Function button functionsThis shows the functions assigned to the function button onthe Home Screen.i F1 button: This opens the Meter Screen.i F2 button: This turns the repeat playback functionon/off.i F3 button: This returns to the state before theprevious operation.i F3 button: This restores the state after the previousoperation.i F4 button: This turns the built-in effect on/off.i F4 button: This adds/deletes marks.NOTEi The F3 button and indicators appear whenthose operations are possible.i Set the F4 button function on the KEY FUNCTION screen. (See“Using mark functions” on page 47)Meters ScreenThis shows the levels of the signals being input to the unit.1 Transport statusThis icon shows the recorder operation status.2 Recorder time counterThis shows the elapsed time from the beginning of the song.3 Track level metersThese show the signal levels of each channel.NOTEChannels 15/16 show the MAIN MIX L/R bus levels.4 Level meter guideThis provides guidance for level adjustment. The guide isshown at the -12dB level.5 Function button functionsThis shows the functions assigned to the function button onthe Meter Screen.i F1 Press to change the input sources shown onthe Meter Screen.i F2 Press to show the level meters for channel1-8 signals on the Meter Screen.i F3 Press to show the level meters for channel9-16 signals on the Meter Screen.TASCAM Model 16 27ENGLISH