Tascam 16 Owner's Manual

Also see for 16: Manual Owner's manual

3 - PreparationConnecting other equipmentThis is an example of Model 16 connections.Precautions before making connectionso Carefully read the operation manuals of the devices to be connected and then connect them correctly.o Before making connections, turn this unit and all equipment to be connected off (standby).o Install all connected devices, including this unit, so that they are powered from the same line. When using a power strip or similardevice, be sure to use one that has high current capacity (thick cable) in order to minimize fluctuations in power voltage.o Before connecting audio equipment, set the following knobs and faders to their lowest values. Failure to do so could cause suddenloud noises from monitoring equipment, and this could damage the equipment or harm hearing.i GAIN knobs (channels 1-8, 9/10-11/12)i Channel faders (channels 1-8, 9/10-11/12, 13/14)i SUB faderi MON 1/MON 2 knobsi MAIN faderi CR faderi PHONES knobo Set the PHANTOM +48V switch to off.Examples of connections to a Model 1630 TASCAM Model 16