Tascam DP-32 Digital Portastudio Owner's Manual

Also see for DP-32 Digital Portastudio: Troubleshooting supplement Schematic diagram

Contents

Tascam DP-32 Digital Portastudio Owner's Manual Manual pdf 20 page image

20 TASCAM DP-322 - Quick Guide• The disc tray will not open when only the Homescreen or MENU screen is open. Open the disc traywhen the CD menu or CD PLAY/IMPORT screen isopen.2. Press the F3 (-) button or the disc tray ejectbutton on the front panel to open the tray slightly.Pull the tray out until it opens completely as shownbelow.3. Hold the edge of the disc with the label side up andput it into the tray so that its central hole is on theround protrusion in the center of the tray, and thenpress the disc gently near the center to mount it onthe tray.NOTEThe disc will click into place and be level with the tray.4. Push the tray to close it. The tray will click whenshut.Writing to a CD-R/CD-RWWhen writing to a CD-R/CD-RW, the procedure differsbetween when you are choosing multiple master files andwhen you are choosing only one file.In this example, we will select multiple master files tocreate a CD that can be played in ordinary CD players.For details about writing to a CD-R/CD-RW, see "Creatingan audio CD" on page 82.1. When in Multi Track mode, press the CD buttonto open the CD menu.2. Place a blank CD (unused CD-R/CD-RW disc or acompletely erased CD-RW) on the disc tray.3. Use the JOG/DATA to select MASTER WRITE andthen press the F4 (t) button.This opens the MASTER WRITE screen and shows alist of songs that have been recorded as master files.4. Use the JOG/DATA dial to select (highlight blue) asong that you want to write to the CD-R/CD-RW,and then press the F2 (4) button.A check mark 4 appears in the check box next to thesong.NOTETo remove the check mark 4 from a check box, press theF2 (4) button again while the song with the 4 is selected(highlighted blue).5. Repeat step 4 above as necessary.6. When you select all songs to be written, press theF4 (t) button to open the WRITE SONG LISTscreen.On this screen, you can change the order that themaster files will be written to the CD-R/CD-RW and setthe gaps between them. (For details about changing