Tascam DP-32 Digital Portastudio Owner's Manual

Also see for DP-32 Digital Portastudio: Troubleshooting supplement Schematic diagram

Contents

Tascam DP-32 Digital Portastudio Owner's Manual Manual pdf 97 page image

TASCAM DP-32 9718 – AppendixMIDI Control Change messageWhen the DP-32 receives MIDI Control Change messages from an external device (such as a sequencer), they can controlthe DP-32 mixer and effect parameters.Mixer control change parametersSelect a channel group of 8 track/input channels beforehand.The Bank Select message is used with the MIDI channel 15 to select a channel group.• Bank 0: track channels 1 to 8• Bank 1: track channels 9 to 16• Bank 2: track channels 17 to 24• Bank 3: track channels 25 to 32• Bank 4: input channels A to HThe following table shows the variable range of mixer parameter and mapping to the MIDI Control Change.MIDI Channel 1 - 8 16Track/Input Channel Stereo MasterControl ChangeNumberParameter Values7 Internal Level 0 - 127 (0=–∞dB, 105=0dB, 127=+6dB) 0 - 127 (–∞ - 0dB)10 Pan 1 - 64 - 127=L63 - C (center) - R6311 DigitalTrim 0 - 48 (–42 - +6dB)16 Low Freq 0 - 31=32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250,300, 350, 400, 450, 500, 600, 700, 800, 850, 900, 950, 1.0k,1.1k, 1.2k, 1.3k, 1.4k, 1.5k, 1.6k (Hz)17 Low Gain 0 - 24=–12 - +12 (dB)18 Mid Freq 0 - 63=32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250,300, 350, 400, 450, 500, 600, 700, 800, 850, 900, 950, 1.0k,1.1k, 1.2k, 1.3k, 1.4k, 1.5k, 1.6k, 1.7k, 1.8k, 1.9k, 2.0k, 2.2k,2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k, 3.6k, 3.8k, 4.0k, 4.5k, 5.0k,5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k, 9.0k, 10k, 11k, 12k, 13k, 14k,15k, 16k, 17k, 18k (Hz)19 Mid Gain 0 - 24=–12 - +12 (dB)20 Mid Q 0 - 6=0.25, 0.5, 1, 2, 4, 8, 1621 High Freq 32 - 63=1.7k, 1.8k, 1.9k, 2.0k, 2.2k, 2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k,3.6k, 3.8k, 4.0k, 4.5k, 5.0k, 5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k,9.0k, 10k, 11k, 12k, 13k, 14k, 15k, 16k, 17k, 18k (Hz)22 High Gain 0 - 24=–12 - +12 (dB)23 EFFECT1 Level 0 - 127 (0=–∞dB, 127=0dB) EFFECT1 Level24 EFFECT2 Level 0 - 127 (0=–∞dB, 127=0dB) EFFECT2 Level80 EQ SW 0, 1=OFF, ON81 EFFECT1 Position 0, 1, 2=OFF, PRE, POST82 EFFECT2 Position 0, 1, 2=OFF, PRE, POST