30 TASCAM DP-323 – Names and Functions of PartsNavigating screensAfter using the MENU button or a dedicated button toopen a screen, follow the guidelines below to use thefunctions on the screen.These examples show basic operation procedures, butthe actual assignments of the function buttons (F1 to F4buttons) depend on the screen.• Use the JOG/DATA dial or the CURSOR (5/b/g/t)buttons to select (highlight green) the desired item.This example shows the MENU screen with the SONGitem selected.• This example shows the SONG LIST menu.Function button assignmentsThe assignments of the function buttons (F1 to F4) areshown at the bottom of the screen above the buttonsthemselves."4" above the F2 button shows that "4" is assigned to theF2 button when using this screen.In this manual, the function assigned to a function buttonis shown in parentheses, for example, "F2 (4) button".In this way, "INFO" is assigned to the F3 button, and "t"is assigned to the F4 button.When an item has a menu, "t" appears on the right side,and the F4 (t) button is used to open it.In the menu, you can press the F1 (g) button to return tothe previous screen.Navigation examplesIn this menu, use the JOG/DATA dial or the CURSOR(5/b) buttons to select LOAD, and then press the F4(t) button to load the song.• When the cursor (highlighted blue) is on a settingvalue, use the JOG/DATA dial to change the value.To select an item, use the CURSOR (5/b) buttons.This example shows the PREFERENCE screen.Use the JOG/DATA dial to change the value.Move the cursor (highlighted blue) up or down.• To move left or right, use the CURSOR (g/t) buttons.• Press the HOME button to return to the Home Screen.
