TASCAM DP-32 598 - Track EditingMOVE/PASTEThe audio data between the IN and OUT points on thesource track is removed and pasted on the target trackfrom the TO point. This operation leaves a silence betweenthe IN and OUT points on the source track.This operation overwrites recorded data on the targettrack. Therefore, the length of the target track is notchanged.The following parameters are used in this operation.• SOURCE Track• IN/OUT/TO• TARGET TrackMOVE/INSERTThe audio data between the IN and OUT points on thesource track is removed and inserted in the target trackstarting from the TO point. This operation leaves a silencebetween the IN and OUT points on the source track.This operation inserts recorded data into the target trackstarting from the TO point. Therefore, the target trackbecomes longer.The following parameters are used in this operation.• SOURCE Track• IN/OUT/TO• TARGET TrackOPEN (Insert Silence)This function inserts silence between the IN and OUTpoints on the selected track.This function splits the track at the IN point and shifts therecorded data after the IN point to after the OUT point.Therefore, the track becomes longer.The following parameters are used in this operation.• TARGET Track• IN/OUTCUT (Remove Part)This function cuts (deletes) the audio data between theIN and OUT points on the selected track, and shifts theremaining recording after the OUT point forward to the INpoint. Therefore, the track becomes shorter.The following parameters are used in this operation.• TARGET Track• IN/OUT
