TASCAM DP-32 314 – PreparationInserting and removing SD cardsInserting an SD cardInsert the SD card into the SD card slot on the rear panelas shown in the illustration until it clicks into place.NOTEAn SD card is already in the SD card slot when the unit isshipped from the factory. If you want to use this card torecord and play tracks, there is no need to reinsert it.Removing the cardPush the loaded card in gently to eject it.CAUTION• Always turn the power off (put in standby) beforeremoving an SD card.• If you remove or insert an SD card when the power ison, recorded data could be lost permanently.• SD and SDHC cards that are at least 512 MB in sizecan be used.• A list of SD cards that have been confirmed to workwith this unit can be found on the TASCAM website(http://tascam.com/).About write-protected SD cardsSD cards have write-protect (lock) switches.Unprotected ProtectedWhen the protect switch is in the LOCK position, filescannot be recorded or edited on the card. Slide the switchaway from the LOCK position if you want to record, eraseor otherwise change files on a card.Powering the unitAs shown in the illustration, connect the included TASCAMPS-1225L AC adaptor to the DC IN 12V jack.The bottom panel has a hook (cord holder) that can beused to hold the AC adaptor cord in place. When using it,wrap the cord around this hook to prevent it from beingdisconnected during use.CAUTION• Use only the included TASCAM PS-1225L AC adaptorand power cord. Use of a different AC adaptor couldcause malfunction, fire or electric shock.• Be sure to use the included TASCAM PS-1225L ACadaptor to supply power to this unit. Power cannotbe supplied to this unit by USB.AC outletDC plug
